Use - Zanussi ZF 67/44 Instructions For Use And Care Manual

The right fuse cover/carrier colour is the
one shown by the coloured insert at the
base of the plug or is the colour of the
inscription at the base of the plug.
The plug must not be used if the fuse
cover/carrier is lost.
A replacement cover/carrier must be
obtained from Zanussi Service Agents
whose addresses are listed on the
attached «Zanussi Service and Spares
Nationwide».
This model has the main terminal board
of the type shown in Fig. 3.
To gain access to the terminals of the
supply cable, remove the lid from the
terminal board by releasing the two
catches «A» and «B» Fig. 3 with the aid
of a small blade screwdriver.
This appliance complies with E.E.C.
directive No. 82/499 of 7.6.82 relative to
radio interference suppression.
Cleaning the appliance's interior
Before using the appliance for the first
time, wash all internal parts with
lukewarm water and neutral soap so as
to remove the typical «new» smell and
then dry thoroughly. Do not use
detergents or abrasive powders as these
will damage the finish.
Fig. 3
Use
Control panel (Fig. 4)
A General switch and SUPER (quick
freeze) operation knob
B Thermostat knob for temperature
adjustment in freezer compartment
C Thermostat knob for temperature
adjustment in refrigerator compartment
D «Normal» operating pilot light
E «SUPER» operating pilot light
F Warning light
G Thermometer (for those models
featuring this device)
Fig. 4