Checking And Cleaning The Hydraulic-Unit Shrouds - Toro Z Master Professional 6000 Series Operator's Manual

2
1
4
Figure 73
1. Oil filter
2. Left side bolts for the
cooling-fan housing
7. Remove the cooling-fan housing.
8. Using compressed air, blow out any debris and grass
from the engine parts, particularly around the cylinder
head cooling fins and ignition coils.
9. Install all of the shrouds onto the engine.
3
2
4
g016907
3. Battery
4. Right side bolts for the
cooling-fan housing
Checking and Cleaning the
Hydraulic-unit Shrouds
Service Interval: Before each use or daily
1. Disengage the PTO and set the parking brake.
2. Stop the engine, remove the key, and wait for all moving
parts to stop before leaving the operating position.
3. Move the seat forward.
4. Clean the debris and grass from the hydraulic-unit
shrouds (Figure 74).
5. Position the seat.
1. Hydraulic-unit shrouds
49
Figure 74