Table of Contents
Advertisement
•
The MVS is built to fit inside an ISO 20 HC (1AAA according to ISO 3874) type shipping
container. It can be transported on a dedicated sea container trailer using the standard
container attachment system.
•
If you are not using a dedicated sear container trailer, lay the MVS directly on the
transportation chassis to prevent sliding and to keep the total height to the minimum
possible level. Use friction enhancement mats (rubber) below the MVS. The maximum
thickness of the mat should not be greater than three cm.
•
For maritime/sea transportation, the maximum values considered are:
•
Stacking load - 96.000 kg
•
Racking load - 75 kN
•
Tare weight - 3100 kg
•
Gross weight - 19.000 kg.
•
Fasten the MVS firmly onto the chasis using heavy duty straps.
￭
Incoming inspection at arrival
•
Visually check for any potential transportation damage(s). If any damages found, mark
and record them and immediately inform your local ABB representative or your ABB
sales contact.
•
Repair any damaged paint. See section,
•
Check that the MVS corresponds to the delivery list and order. Record the deviations
(if any) and immediately inform your local ABB representative or ABB sales contact.
Storing, lifting and transporting 31
Maintenance of painted surfaces (page
62).
Advertisement
Table of Contents
