...4.4.1 Set Up
English
Language
None
Global Alarm Acknowledge
SM2000
Instrument tag
4.4.2 Security
Security
Set Up
Logs
Operator Messages
User 1
User 1
Name
Password
User 2
User 3
User 4
Configuration security
Setup level security
Setup Level Password
RS 485
Operator 1
Operator 1
****
Operator 2
Operator 3
Operator 4
Password protected
On
****
Select the language to be used to display standard user
prompts and menu items.
A digital source can be used to acknowledge active alarms in
both Process Groups 1 and 2. Refer to APPENDIX 1 for a full
list of sources available.
Enter the tag to be used to identify the instrument on
configuration and audit log files.
Change the user name and password used to access the
configuration level when 'Password protection' is enabled –
see below.
Note. Only the current user's name and password
may be changed.
When a change to the instrument's configuration occurs, the
user's ID is added to the audit log entry.
OK
Set the method of access to the Configuration level. If
'Password protected' is selected, access is by means of the
password set above.
Note. If 'Switch protected' is selected, access to the
Configuration level for all users is prohibited once the
changes have been saved and made active. Access to the
configuration level can then be achieved only by setting the
security switch to the 'Configuration not protected' position
– see Fig. 4.1.
When set to 'On', access to the Setup level is protected by a
single password for all users.
Displayed only when Setup Level Security is set to 'On'
4 CONFIGURATION...
37