4.6.1 Recording Channel Set Up
Note. Parameters applying only to Advanced configuration are identified
Set Up
None
Source ID
Red
Trace colour
•1 If this parameter is changed, a new internal data file for this recording channel is created. All historical data stored internally for this
channel is lost.
A
.
Select the signal source for the selected channel. This can be
•1
any external analog or digital signal. See APPENDIX 1 for full
list.
Note. The tabs change according to selection.
Set Up
Analog I/P A1
Source ID Analog Input A1
Set Up
Comms Digital I/P 1
Source ID Comms Digital I/P 1
Select the color used to display the trace and its short tag on
A
Chart and Digital Indicator views.
Note. The trace color cannot be changed when Basic
configuration is selected.
1st
2nd
Magenta
Red
When Advanced configuration is selected, trace colors can
be selected from the following:
Cyan, Magenta, Blue, Dark Cyan, Dark Blue, Yellow, Light
Green, Dark Yellow, Green, Red, Brown, Black
4 CONFIGURATION...
Alarm A
Alarm B
Totalizer
A – Analog Source
Totalizer
B – Digital Source
3rd
4th
5th
Black
Green
Blue
Scales
6th
Brown
51