Yamaha 02R96 Owner's Manual page 28

28
Chapter 2—Control Surface & Rear Panel
PAN/SURROUND
A
PAN/SURROUND DISPLAY button
This button is used to select the Input Channel Pan pages, the Surround Mode page, and
the Surround Edit pages. See "Panning Input Channels" on page 83 and "Using Surround
Pan" on page 85.
B
L & R buttons
These buttons can be used to select horizontally or vertically partnered Input or Output
Channels. They can be used to select the left and right channels when the Stereo Out is
selected. For Input Channels, in Individual Pan mode, the [L] button indicator lights up
when an odd/left channel is selected; the [R] button indicator, when an even/right channel
is selected. In Gang or Inverse Gang Pan mode, the button indicator of the other channel in
the pair flashes while its partner is selected.
C
PAN display
This 10-segment display indicates the pan position of the currently selected Input Channel.
When pan is set to center, the center two segments light up. When the Stereo Out is selected,
it displays the balance.
D
PAN control
This rotary control is used to pan the currently selected Input Channel. When the Stereo
Out is selected, it is used to set the balance. For Input Channels in Gang or Inverse Gang
Pan mode, horizontally or vertically paired Input Channels are panned simultaneously. See
"Panning Input Channels" on page 83 and "Balancing the Stereo Out" on page 94.
E
LINK button
This button, which is enabled only when a Surround mode other than Stereo is selected, is
used to link the PAN control and the Joystick so that either control can be used for normal
and surround panning. It's a global setting that applies to all Input Channels. Its indicator
lights up when the PAN control and Joystick are linked. If the Joystick is set to control effects
(i.e., the [EFFECT] button indicator is lit), this button is disabled. See "Panning Input
Channels" on page 83 and "Using Surround Pan" on page 85 for more information.
F
GRAB button
This button is used to turn on and off Joystick control for the currently selected Input Chan-
nel. Its indicator lights up when Grab is on. When Grab is on, the Joystick can be used to
control the currently selected Input Channel's surround pan position. When turned off, the
Joystick does not control surround pan. In Stereo mode, it controls the currently-selected
Input Channel's pan position. If the PAN control and the Joystick are linked (i.e., the
[LINK] button indicator is lit), Grab is turned off if the PAN control is adjusted. If the Joy-
stick is set to control effects (i.e., the [EFFECT] button indicator is lit), this button is dis-
abled.
G
EFFECT button
This button is used to select the Joystick for parameter control of the Reverb 5.1 effect. Its
indicator lights up when Reverb 5.1 effect control is on, and the Joystick cannot be used for
surround panning. See "REVERB 5.1" on page 276 for more information.
02R96 Version 2—Owner's Manual
1 PAN / SURROUND
DISPLAY
L
L R
ODD
2 3
8
R
LINK GRAB EFFECT
EVEN
4 5 6 7