Advertisement
9
Close the paper cassette.
10
Replace the output tray.
11
Press the right and left ink cartridge covers to open them.
12
Remove the protective materials inside the ink compartments.
13
Close the ink cartridge covers.
Turn On and Configure
1
Connect the power cord to the back of the printer and plug the other
end into an outlet.
Connection cable
Note:
Do not disconnect the connection cable.
2
Press the
power button on the control panel to turn on the printer.
3
Select your language, date, and time on the touchscreen.
Note:
•
You can change these settings later using the product's control panel. For
more information, see the online User's Guide.
•
If an error code appears, turn off the printer and check that no protective
material has been left inside.
4
Follow the instructions on the touchscreen to begin ink initialization.
Install Ink Cartridges
Caution:
Keep the ink cartridges out of the reach of children
and do not drink the ink.
Note:
•
The printer is designed for use with Epson cartridges only, not third-party
cartridges or ink.
•
The cartridges included with the printer are designed for printer setup and not for
resale. After some ink is used for initializing, the rest is available for printing.
1
Press the right and left ink cartridge covers to open them.
2
Open the ink cartridges and shake them as shown for 5 seconds, or
about 15 times.
Caution:
Do not touch the green chip on top of the cartridge. Doing so may
prevent normal operation and printing.
3
Insert the cartridges in the slot for each color as described on the labels
inside the ink cartridge covers. Push the cartridges in until they click.
Note:
Make sure all of the ink cartridges are properly inserted in the product;
otherwise printing is not possible.
4
Close the ink cartridge covers.
5
The printer begins charging the ink delivery system. This takes about
16 minutes and you see a message on the touchscreen when it is
complete.
Caution:
Do not turn off or unplug the printer or perform any other operations
during ink charging or you'll waste ink.
Note:
•
You may need to replace the maintenance box (part number T619000)
soon after ink initialization. See the online User's Guide for instructions.
•
See the online User's Guide for instructions on loading paper and using
the paper cassette cover.
Advertisement
