Tune To A Dab Station Preset; Dab Display Information - Sharp DR-P520 User Manual

16

Tune to a DAB station preset

You can easily access your stored preset stations
when in DAB mode.
1. Short press the
preset locations (1-40), showing either stored
stations' names or frequencies, or <Empty> if
no station is stored.
2. Use the and
station preset that you would like to listen
to (1-40).
3. Press the
The radio will tune into the DAB station if
available.
NOTE: If no station has been stored in the preset and
it is selected, the display will read <Preset Empty>
and the radio will return to the last selected station.
button. This reveals a list of
buttons to move to the
button to select the station.

DAB display information

When listening to a DAB station, you can change
the information that will appear on the display.
There are several different types of information
that are sent by the broadcaster. Repeatedly
short press to cycle through the different
information options:
• Dynamic Label Segment (DLS) - This is scrolling
text information as supplied by the broadcaster.
This could include artist names, song titles,
contact details for the radio station, etc.
• Signal strength - An empty
display to indicate the minimum signal strength
for acceptable listening. The row of solid
squares indicates the actual signal strength that
you are receiving.
• Program type (PTY) – e.g., 'Rock' , 'Pop' , 'Talk' or
'News'
• Channel and frequency – e.g. 12B 225.648 MHz
(Channel=12B, Frequency=225.648 MHz).
• Bitrate - The data rate at which the signal is
being transmitted.
will appear on the