Display Specifications; Solid-State Drive Specifications - HP Envy 17-da0 Series Maintenance And Service Manual

Table 9-1 Computer specifications (continued)
Nonoperating
NOTE: Applicable product safety standards specify thermal limits for plastic surfaces. The device
operates well within this range of temperatures.

Display specifications

This section provides specifications for your display.
Table 9-2 Display specifications
Active diagonal size
Resolution
Surface treatment
Brightness
Viewing angle
Backlight
Display panel interface

Solid-state drive specifications

This section provides specifications for your solid-state drives.
Table 9-3 Solid-state drive specifications
Dimensions
Height
Length
Width
Weight
Interface type
Ready time, maximum (to not busy)
Access times, logical
Transfer rate
Sequential read
Random read
Sequential write
Metric
–15 m to 12, 1 92 m
Metric
43.9 cm
1920 × 1080 (FHD)
Antiglare
300 nits
UWVA
LED
eDP
512 GB* 1 TB*
1.0 mm 1.0 mm
50.8 mm 50.8 mm
28.9 mm 28.9 mm
< 10 g < 10 g
PCIe PCIe
< 1.0 ms 1.0 ms
0. 1 ms 0. 1 ms
up to 2150 MBps up to 2150 MBps
Up to 300,000 IOPs Up to 300,000 IOPs
up to 1550 MBps up to 1550 MBps
U.S.
–50 ft to 40,000 ft
U.S.
17.3 in
2 TB*
1.0 mm
50.8 mm
28.9 mm
< 10 g
PCIe
1.0 ms
0. 1 ms
up to 3800 MBps
Up to 300,000 IOPs
up to 2670 MBps
Display specifications 71