Kenwood KRC-767D Service Manual page 17

CIRCUIT DESCRIPTION
Initial Setting of Diode Switches
Function Description
Selection of model version (for different destination)
U.S.
Japan
Europe {with LW band)
Middle East, and Europe (without LW band)
" However, if the unit is set for the version for U.S., Middle East or Europe (without LW), it can be
changed again, by the user, within these three settings when POWER ON.
Selection of the number of the preset channels
Selections for the direct access function
Direct access function
Available
Not available
Not available
POWER A
POWER B
Power ON/OFF method
By means of VATT key.
POWER key is always invalid.
Not by the momentary key.
POWER key is always invalid.
By means of the IGN port.
Selection of the number of memories for FM
FM 2 BAND Number of bands | FM BAND display
Double of the number selected by
"CH A" and ''CH B"'
Selection of SDK function, and Noise— Volume Boost function
This function is effective only when the BAND A and BAND B are set to the destination for Europe,
Middle East or Europe (without LW).
| SDK function _| Noise— Volume Boost function
Available Not available
Not available Available
Selection system of the DOLBY NR switch
ae el witout DOLBY
|
OFF
DOLBY-B/C mutual reset
ON/OFF selection of the electronic volume control function
— VOL Electronic volume control function
Available
Not available
FM 2 BAND
17