Disassembly For Repair - Kenwood KRC-767D Service Manual

DISASSEMBLY FOR REPAIR
=_
. Remove the screw @ at the rear of the top cover.
2. Using the flat-blade screwdriver, remove the hooks at the
both sides of the top cover in the direction of the arrow. @
3. Remove the top cover paying attention to the two lugs
located at the front side of the top cover. 3)
4. Remove the four screws @ retaining the handle.
5. Remove the two screws @ at the both sides of the front
panel. ;
6. Remove the volume knob and the fader knob in the direc-
tion of the arrow, then remove the front panel in the direc-
tion of the arrow. @
Removing the mechanism assembly
7. Remove the four screws @ retaining the mechanism
ass'y, and remove the three connectors.
Removing the power IC
8. Remove the two screws @ retaining the power IC at the
tear, and slide it in the direction of the arrow.
9. Unsolder the power IC, and remove it in the direction of
the arrow. @