Parts Description; Functional Description; Installing Or Removing Battery Cartridge - Makita DUC256 Instruction Manual

Cordless chain saw
Hide thumbs Also See for DUC256:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
4.
When not using the battery cartridge, remove
it from the tool or the charger.

PARTS DESCRIPTION

► Fig.2
1
Battery indicator
4
Top handle
7
Guide bar
10
Retaining nut
13
Main power lamp
16
Cap
19
Front handle
22
Guide bar cover
FUNCTIONAL
DESCRIPTION
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before adjusting or checking function on the tool.
Installing or removing battery
cartridge
CAUTION:
Always switch off the tool before
installing or removing of the battery cartridge.
CAUTION:
Hold the tool and the battery car-
tridge firmly when installing or removing battery
cartridge. Failure to hold the tool and the battery
cartridge firmly may cause them to slip off your hands
and result in damage to the tool and battery cartridge
and a personal injury.
► Fig.3: 1. Red indicator 2. Button 3. Battery cartridge
To remove the battery cartridge, slide it from the tool
while sliding the button on the front of the cartridge.
To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Insert it all the way until it locks in place
with a little click. If you can see the red indicator as
shown in the figure, it is not locked completely.
CAUTION:
Always install the battery cartridge
fully until the red indicator cannot be seen. If not,
it may accidentally fall out of the tool, causing injury to
you or someone around you.
CAUTION:
Do not install the battery cartridge
forcibly. If the cartridge does not slide in easily, it is
not being inserted correctly.
5.
2
Check button
5
Lock-off lever
8
Saw chain
11
Chain adjusting screw
14
Mode indicator
17
Adjusting screw (for oil pump)
20
Oil tank cap
-
-
Indicating the remaining battery
capacity
► Fig.4: 1. Battery indicator 2. Check button
Press the check button to indicate the remaining battery
capacities. The battery indicators correspond to each
battery.
15 ENGLISH
Charge the battery cartridge if you do not use
it for a long period (more than six months).
3
Switch trigger
6
Front hand guard
9
Chain catcher
12
Battery cartridge
15
Main power switch
18
Carabiner
21
Spike bumper
-
Battery indicator status
On
Off
-
Remaining
battery
capacity
Blinking
50% to 100%
20% to 50%
0% to 20%
Charge the
battery

Advertisement

Table of Contents
loading

This manual is also suitable for:

Duc306Duc356Duc406Duc256c

Table of Contents