Makita RM350D Setup Manual page 13

• Make multiple islands as follows.
Fig.12
► 1. Boundary wire 2. Peg
Making a sub area
If there is a separate work area to which a path that enables the Robotic Mower to navigate automatically from the charging station cannot be pro-
vided, that work area is designated as a sub area (b). The area with the charging station is the main area (a).
• It is necessary to turn off the power of the Robotic Mower and move the Robotic Mower by hand between the main area and the sub area.
• Place the boundary wire so that the path width between the main area and the sub area is 10 cm or less.
• The boundary wire must be laid in a single, unbroken line around the entire work area ((a) and (b)).
• When mowing the sub area, it is necessary to change the Robotic Mower settings. For details, refer to the Instruction Manual of this product.
Fig.13
► 1. Boundary wire 2. Charging station 3. 10 cm or less
► a) Main area b) Sub area
1
2
(a)
2
13 ENGLISH
1
(b)
3