Makita RM350D Setup Manual page 26

The option menu appears.
5. Use the keypad and enter the desired conditions to the option format fields displayed on the screen.
Option
Wire to trace:
Departure position:
Probability
Fig.45
► 1. Maximum probability value that can be entered
NOTE: The maximum probability value that can be entered will be displayed in the left of entry area of each profile. Enter the value that is smaller
than the maximum value. If you enter the value beyond the allowable value, it will be replaced with the maximum value.
6. Select [Test] and execute test operation before registering the settings.
The Robotic Mower travels along the selected wire.
The Robotic Mower stops automatically after the distance you enter.
NOTE: The confirmation is finished if the Robotic Mower departs from the charging station and stops at the designated point.
7. Press the "STOP" button.
The display cover opens.
8. Select [Yes] to register or [No] to cancel the registration when the confirmation screen asking whether to register the test run departure method
is displayed.
If you select [No], you need to start the setting from the beginning again.
Checking boundary wire installation
Check that the boundary wire is installed correctly.
1. Hold the grip of the Robotic Mower and move the Robotic Mower by hand so that it faces the boundary wire.
Fig.46
► 1. Boundary wire
2. Press the "STOP" button.
The display cover opens.
3. Press the button, select [Auto mowing] and press the
4. Close the display cover.
The Robotic Mower starts mowing and travels toward the boundary wire.
Details
Select the type of wire that the Robotic Mower is to trace after departing from the charging station. Use
the / keys to display the desired wire type. To depart directly from the charging station without tracing a
specific wire, select [--------].
Enter the distance that the Robotic Mower is to move from the station before starting the mowing work. You
can enter a distance of 0 to 800 m.
Enter the probability of executing the set profile as a percentage.
key.
1
26 ENGLISH
1