Advertisement
Introduction.................................................................6
Safety.........................................................................7
Assembly...................................................................8
Operation...................................................................9
Product overview
(Fig. 1)
1. Blades connector
2. Lower tidy cover
3. Resistance rod
4. Tine cover
5. Tine cover bracket
6. Extension tine cover
7. Tine blades holder (Secondary)
8. Connecting plate
9. Gear lever
10. Side cover
11. Blades
12. Locking knob
13. Rubber cable holder
14. Wheel
15. Tine cover bracket RR.
16. Tine blades holder (main)
17. Hardware Bag (tine cover only)
18. Hardware bag (tines only)
19. Tool bag
Symbols on the product
(Fig. 2)
WARNING: Be careful and use the product
correctly. This product can cause serious
injury or death to the operator or others.
(Fig. 3)
Read the operator's manual carefully and
make sure that you understand the
instructions before use.
(Fig. 4)
Use approved hearing protection and
approved eye protection.
(Fig. 5)
Fast
(Fig.
)
Slow
6
(Fig. 7)
Stop the engine and remove the ignition
cable before repairs or maintenance.
(Fig. 8)
Beware of rotating working tool
Content
Maintenence...........................................................11
Trobleshooting.........................................................12
Transportation and Storage.....................................14
Technical Data.........................................................14
Introductio
n
(Fig. 9)
Keep bystanders away from the product
(Fig. 10)
Neutral gear
(Fig. 11)
Reverse gear
(Fig. 12)
Fast forward
(Fig. 13)
Slow forward
(Fig. 14)
Low Speed
(Fig. 15)
High Speed
(Fig. 16)
Turn on the fuel valve
(Fig.
17
)
Close the choke
(Fig.
)
Pull recoil starter
18
(Fig.
)
Open the chok
19
Note:
Other symbols/decals on the product refer to
certification requirements for other commercial areas.
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
•
the product is incorrectly repaired.
•
the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
•
the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
•
the product is not repaired at an approved service
center or by an approved authority.
Type plate
e
Advertisement
