Wi-Fi Connection - Pioneer ERV035AVTTW5W Owner's Manual

Wi-Fi Connection

IOT NETWORKING FUNCTIONS
CO Version
2
ERV name: The app can connect multiple devices. Each device will have a
di erent name, and users can change the device name freely
Pairing icon: After the
devices are paired, the
icon is displayed, and the
slave is o ine and can't be
controlled
Filter alarm: It reminds the
user to clean or replace
the filters. Icon disappears
after reset
CO concentration setting:
2
When the CO sensor is
2
connected, if the indoor
CO concentration exceeds
2
the set value while the
unit is operating in
regeneration mode, the
unit will enter the supply
mode to introduce fresh
air to dilute the CO
2
concentration until the CO
2
concentration is lower than
the set value. The unit then
returns to the previous
mode. It can be set from
400 to 2000ppm
12-hours timer
Power ON/OFF
Operating mode: (supply
mode, exhaust mode,
regeneration mode)
CO concentration Free cooling
2
function ON/OFF function ON/OFF
Outdoor temperature:
Displays the outdoor
temperature when the
unit is ON and operating
in supply or regeneration
mode. In exhaust mode,
the outdoor temperature is
not sensed and displayed
Free cooling temperature
setting: When the outdoor
air is comfortable, it will
work in supply mode to
introduce fresh air without
heat recovery, which is called
free cooling. Users can set
the outdoor temperature
to enable this function.
The setting range is 50°F to
84°F
Real-time indoor CO
2
concentration
Remaining time after the
scheduled shutdown
Fan boost function: The
unit will supply/exhaust at
the highest speed.
Fan speed: Total 3 speeds
Negative ion Indicator lights
function ON/OFF ON/OFF
17
Wi-Fi Connection
Installation of "Pioneer Airlink" smartphone application
Search for "Pioneer Airlink" in the Google Play Store (for Android users) or the App Store (for iOS users).
Note that a 2.4GHz Wi-Fi connection is needed to use the Wi-Fi control feature.
Or, scan the below QR code to download the app from the respective app store.
Download Android App
Wireless Control App Setup Process
1. Registration and Log-In:
If you do not already have a "Pioneer Airlink" account, please create and account and log-in
by following the below steps:
i. Approve the "User Agreement" and "Privacy Policy" when they appear by tapping "I Agree".
ii. Tap the "Sign Up" button, choose your country, and enter your mobile number/e-mail to register,
tick "I Agree" on "User Agreement and Privacy Policy", then tap the "Get Verification Code" button.
The phone or e-mail that you're registering will receive a registration verification code.
iii. Enter the verification code and select a password. You will then either land on the homepage of
the App, or back to the login interface to log into the app, by using the account you just created.
2. Adding a New Device:
i. Confirm that your phone is connected to Wi-Fi (2.4GHz networks only, 5Ghz will not work).
Tap the "+" at the top-right corner of the homepage, to enter the device selection page.
ii. Once you've entered this page, head to your Pioneer ERV system and long press "On/Off"
buttons when the ventilator is turned ON, until the Wi-Fi symbol on the display screen flashes.
(Fast flashing indicates Wi-Fi connection, slow flashing refers to hotspot network.)
Download iOS App
18