Pioneer ERV035AVTTW5W Owner's Manual page 11

Wi-Fi Connection
IOT NETWORKING OPERATION STEPS
1. Before enabling IoT networking operation,
please connect your cell phone to your home
router Wi-Fi, turn on the Bluetooth function of
your cell phone, and ensure that the device
and cell phone are within the Wi-Fi signal
coverage (make sure the router Wi-Fi is
enabled for 2.4G network).
2. When the device is powered on, in the OFF
state, long press the ON/OFF button of any
device for 5 seconds, the device status
indicator will flash red slowly, then the device
will enter the Wi-Fi pairing state, and the
cell phone will be available for operation and
connection.
3. Open the downloaded Pioneer Airlink app,
enter the operation page, click the add
device box, and search for devices.
4. At this time the app receives the signal from
the device, then proceeds to add the device for
network connection.
19
Wi-Fi Connection
WI-FI RESET AND CANCELLATION
Remove the device from
the app as follows:
5. Click Add Device to find the
Wi-Fi signal of your home
router, and make sure the
Wi-Fi name on the app is the
1.
same as the name of the Wi-Fi
connection to your phone, then
log in with the Wi-Fi password.
6. After successful Wi-Fi connection, 2. Click on the remove device option and confirm to
the device will be connected to the
network, and after the connection is
completed, you can enter the operation
page to operate.
Return to the app operation connection page, long
press the device that needs to be disconnected,
then the option to remove the device will appear
at the bottom.
successfully disconnect the device from Wi-Fi.
20