Operating Instructions - Kenwood KR-A5050 Instruction Manual

Operating instructions
Flaying a source
*| Turn the POWER ON.
POWER
Main unit Remote control unit
2 Select the input source.
%
Main unit Remote control unit
r~ rt
/_ Jj
The selected source name appears on the display.
4 Adjust the volume.
VOLUME CONTROL
□
mm
□
T7
Remote control unit
When the volume is adjusted from the remote control unit,
the VOLUME CONTROL knob on the main unit rotates while
the point indicator blinks.
0 Adjust the left and right volume balance.
To decrease right ff ' To decrease left
speaker volume U, Jj speaker volume
3 Play the source component.
0 Adjust the tone controls.
To increase To decrease
treble
The selected source component starts playing automatically
if it is connected by a system control cord.
Notes on input selector keys
• When the TAPE 2 key is set to ON, the source selected with the input selector cannot be heard from the speakers. To listen to a source
other than cassette deck 2, be sure to set the TAPE 2 key to OFF.
• The source last selected with the input selector is backed up fora few days even when the power cord is unplugged. After this period,
the tuner is automatically selected when the power is turned on.