Kenwood KR-A5050 Instruction Manual page 20

Specifications (For other countries)
A Caution: Read this page carefully to
ensure safe operation.
EAUDIO section]
Rated power output
(IHF66) From 20 Hz to 20,000 Hz, 0.06 % T.H.D.
at 8 Q....105 W+105 W
Total harmonic distortion
.....0.03 % (1 kHz, 50 W, 8 £2)
Signal to noise ratio
(IHF'66)
PHONO (MM).73 dB
LINE (CD,TAPE, VIDEO) .100 dB
Input sensitivity / impedance
PHONO (MM).2.5 mV / 47 k Q
LINE (CD, TAPE, VIDEO).200 mV / 47 k Q
Tone control
BASS.± 10 dB (at 100 Hz)
TREBLE.± 10 dB (at 10 kHz)
Loudness control (volume at-30 dB level)
...+ 9 dB (100 Hz)
[AM tuner section]
Tuning frequency range
9 kHz step.531 kHz ~ 1,602 kHz
10 kHz step.530 kHz -1,610 kHz
Usable sensitivity.16 p V / (400 p V/m)
Signal to noise ratio (at 30% mod. ImV input) ....50 dB
Total harmonic distortion...0.5 %
Selectivity.23 dB
[General]
Power consumption.230 W
AC outlet
SWITCHED.2: (Total 150 Wmax.)
Dimensions.W: 440 mm
H: 129 mm
D: 379 mm
Weight (Net)...10,2 kg
[FM tuner section]
Tuning frequency range.87.5 MHz - 108 MHz
Usable sensitivity (MONO at 75 £2} ..0.95 p V / 10.8 dBf
50 dB quieting sensitivity (at 750)
MONO.2.0 [iV / 17.2 dBf
STEREO.25,0
p
V / 39.2 dBf
Total harmonic distortion (at 1 kHz)
MONO.0.4 % (65 dBf input)
STEREO...0.5
%
(65 dBf input)
Signal to noise ratio (at
1
kHz)
MONO.78 dB (65 dBf input)
STEREO.73 dB (65 dBf input)
Stereo separation
1 kHz.
45
dB
Selectivity (± 400 kHz).50 dB
Frequency response
(30 Hz
-
15 kHz)
.+ 0.5 dB, - 2.0 dB
Note:
KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
20
KR-A5050 (En)