Table of Contents
Advertisement
Listening to a Tape
1.Press button [2] to open the front panel
<S
2.When a cassette tape is inserted into the
cassette slot, power will be turned on and
the tape will begin playing.
=
3.Close the front panel and adjust the
volume and tone.
5.To eject the cassette, press button [2] to
open the front panel [4], then press the
Eject button.
+ When a cassette is already loaded, tape
playback can be turned ON/OFF by
pressing button [3] or [19].
+ Do not try to eject the cassette
immediately after insertion, as it may
result in malfunction.
Only eject a
cassette when it is playing.
4.To stop playback, press button [3] or [19]
to switch the source OFF.
Continuous Playback Time
During tape playback, the continuous
playback time is shown in [38] in the
display.
* The continuous playback time count is
halted at the following times.
— When the power is turned OFF.
— When you switch to another source.
— When fast-forwarding/rewinding and
while the Music Search function is
operating.
+ The continuous playback time count
starts at "00°00" at the following times.
— When a tape is inserted.
— When the tape direction is changed by
pressing button [14].
— When the tape switches from side A to
side B, or vice versa.
Tape Direction Switching
Pressing button [14] switches tape playback
from side A to side B, or vice versa.
*">>>>" is displayed in [37] when side A is
playing, and "<<<<" when side B is playing.
Fast Forward/Rewind
1.To fast-forward a tape, press the P> side
of button [17]. ("FF" appears in the
display.)
To rewind a tape, press the <4 side of
button [17]. ("REW" appears in the
display.)
2.To cancel fast-forwarding or rewinding,
press button [14].
Advertisement
Table of Contents
