Table of Contents
Advertisement
Scan Playback
"
This function plays approximately the first
10 seconds of each track in succession.
This is useful for finding a particular track
you want to hear.
1.When button @ of bank [10] is pressed,
the first 10 seconds of each track is
played in succession.
("SCAN" appears
in the display.)
2.When you find the track you want to hear,
press button @ of bank [10] again to
cancel scan playback and hear the rest of
the track.
The scan playback function may not work
properly with the following kinds of
recorded tapes because the gap between
tracks cannot be found correctly.
— A tape with a gap of 4 seconds or less
between tracks.
—~ A tape containing dialog, etc., with
pauses lasting for 4 seconds or longer.
— A tape with an extremely quiet
Passage in the music lasting for 4
seconds or longer.
Repeat
The repeat function lets you hear the same
track over again.
1.Pressing button @ of bank [10] allows
you to repeat the track being played.
("RPT* [39] lights.)
2.The repeat function can be canceled by
pressing button © of bank [10] again, or
pressing button [14].
+ The repeat function may not work
properly with the following kinds of
recorded tapes because the gap between
tracks cannot be found correctly.
— A tape with a gap of 4 seconds or less
between tracks.
— Atape containing dialog, etc., with
pauses lasting for 4 seconds or longer.
— A tape with an extremely quiet
passage in the music lasting for 4
seconds or longer.
FLEX (Frequency Level Expander)
If the high-frequency performance is poor
when playing back an old or poorly
recorded cassette, you can improve it by
pressing button @ in Bank [10]. ("1/#* [35]
appears.)
+ This function may have little effect on a
casstte offering good sound quality, for
instance, one recorded from compact
disc.
Playing a CD
CD Control
Advertisement
Table of Contents
