Table of Contents
Advertisement
1
(12) Remove the two screws.
(
SC-99/CUXJ
SC-97/CUXJ
SC-LX89-K/SYXJ8
A
SC-LX79-K/SYXJ8
(
SC-LX89-S/SYXJ8 : BBZ30P080FNI
SC-LX79-S/SYXJ8
(13) Remove the four screws. (ABA1193)
(14) Remove the three screws. (BBT30P080FCC)
(15) Unhook the two hooks.
(16) Remove the Front Section.
[1-2] Diagnosis
B
(1) Arrange the unit as shown in the photo.
(2) Connect the another normal HDMI Cable.
(3) Connect the another normal HDMI Cable
from the DIGITAL MAIN ASSY.
JA9620
C
DIGITAL MAIN ASSY
FRONT HDMI USB ASSY
HDMI Cable
3
D
JA8003
[2] Rear Section
Remove the Bonnet by removing the 18 screws.
-----------------------------------------------------------------
[2-1] Rear Section
(1) Remove the HDMI Cable (ADX7732) by disconnect
the connector, and then connect the another normal
E
HDMI Cable.
Note: Don't connect the HDMI Cable (ADX7732)
provided with the product to prevent damage to
the HDMI connector for the DIGITAL MAIN ASSY.
Instead, use the another normal HDMI Cable to
prevent a load from being applied to the HDMI
connector.
Always connect the HDMI Cable because the
Wireless LED blinks, which causes a shutdown,
if the power is turned on without the cable
connected.
F
50
1
2
: BBZ30P080FTB
)
)
HDMI Cable
2
2
3
13
12
• Bottom view
14
15
• Top view
Note: Always connect the HDMI Cable because the Wireless LED
blinks, which causes a shutdown, if the power is turned on
without the cable connected.
1
JA8003
Front
SC-99
3
4
12
Front Section
16
15
14
1
Front Section
HDMI Cable
FRONT HDMI USB ASSY
4
13
14
Advertisement
Table of Contents
