Table of Contents
Advertisement
Configuring HP 16500B Modules
To restore module configurations
To restore module configurations
Access the HP 16500B's file system as the control user.
1
Refer to the "Accessing the HP 16500B File System" chapter.
Copy the setup.raw file to the appropriate \slot_{x} directory.
2
You can restore HP 16500B system and Intermodule Bus configurations by
copying files from your computer to \setup.raw.
Example
Suppose you want to load a configuration file called "486_bus" from your local
computer into an HP 16550A state/timing module. The HP 16550A is installed
in slot B of the HP 16500B mainframe. The mainframe is mounted on your
network as disk drive L:.
To load the configuration file, at the MS-DOS prompt enter:
copy 486_bus L:\slot_b\setup.raw
If your computer is running the UNIX operating system, you might use the cp
command. In an MS Windows environment, you can use File Manager.
4-4
Advertisement
Table of Contents
