Table of Contents
Advertisement
Selecting the roller speed
There are 5 roller speed settings, from
low (approximately 6.5 ft/min.[2 m/min])
to high 15 ft/min. [4.5 m/min]).
A lower roller speed makes it easier to
iron complicated articles, such as shirts
and blouses. It is also best to select a
low roller speed when ironing layered
or folded items, which may require
more than one pass through the rotary
iron to get them smooth and dry.
Thinner, single-thickness articles, such
as handkerchiefs or dishcloths, can be
ironed at a higher roller speed.
^ Set the roller speed selector to the
desired speed.
Ironing
The ironing process is controlled by the
foot pedal, which has three operating
positions:
– rest (heater plate is raised)
– press
– iron
To iron:
^ Press the foot pedal all the way down
to the floor.
,
Do not put fingers between the
heater plate and the roller.
Danger of crushing and burns!
To press:
^ First press the foot pedal down to the
floor, then lift your foot up a little, so
that the heater plate remains in
position but the roller does not rotate.
To raise the heater plate:
^ Take your foot off the pedal.
Ironing
19
Advertisement
Table of Contents
