After Ironing - Miele HM1680D Operating Instructions Manual

Tips
– To avoid creasing:
Stop the roller, pull the item back
towards you slightly, and smooth it
out by hand. If needed, dampen
again with a wet cloth or spray bottle.
– If possible, always use the whole
width of the roller, to maintain the
smooth, elastic surface of the roller.
– For small items, such as
handkerchiefs, alternate between the
right and left-hand sides of the roller.
– Articles with raised parts, such as
buttons, should be ironed face down
onto the roller, so that they are
pressed into the cushioned surface.
– Cover zippers, metal buttons and
metal hooks with a cloth, to protect
the heater plate.
– Buttons that are very large or not
heat-resistant should not be ironed,
as they can damage the heater
plate.
– When you have nearly finished
ironing, you can set the temperature
selector to l and continue ironing
small items at a low temperature.

After ironing

^ Turn the appliance off.
^ Turn off the Q switch for "Steam".
^ Turn the temperature selector to I .
^ Unplug from the outlet.
To store the rotary iron:
^ Allow the heater plate to cool.
^ Empty the water reservoir.
^ Fold the iron.
^ Wind up the power cord.
^ Put the cover on.
Do not store the iron in a room
where there is a risk of frost
occurring. Frozen water in the
reservoir and steam line can
damage the appliance.
Ironing
21