Table of Contents
Advertisement
ELECTRIC WALL OVEN INSTALLATION INSTRUCTIONS
3. Cabinet Installation
IMPORTANT!
You must install the trim kit and/or the shims
before placing your oven in the cabinet. You
will not be able to install the trims kit and/or the
shims after the oven has been installed.
Installing Shims
Installing shims adds up to 5/8 of an inch to the
base cabinet height.
To install shims, secure both the left and right shim
to the base of the cabinet with screws as shown in
Figure 7.
Installing Trim Kit
The trim kit (Fig. 6) can be installled with or
without the shims.
If you are installing the trim kit by itself:
1.
Secure both sides to the braces of the base of the
cabinet.
If you are installing both the shims and the trim kit:
1.
Install the shims (as instructed above)
2.
Install the trim kit to the shims.
Figure 6
Trim Kit
IMPORTANT!
If you are installing both the shims and the trim
kit, you must install the shims first and then the
trim kit.
NOTE: The shims are not included to make the
shims as needed depending on the size of existing
cut-out. Top of the shims to top of the cabinet
opening should be 37 1/2 in.
37 1/2"
95.3 cm
Installing Trim After Shims
6
Figure 7
Advertisement
Table of Contents
