Power Cable Connections (Pci_Box); Figure 2.20 200 V Dual Power Feed Configuration With Power Distribution Box Connection; Figure 2.21 100 V Configuration (Single Power Feed, No Redundant Power Feed) - Fujitsu PRIMEQUEST 2000 Series Hardware Installation Manual

CHAPTER 2 Connected Information
2.3 Power cable connection
200 V Dual Power Feed Configuration with Power Distribution Box Connection
It is necessary to arrange six PSUs, six power cables (200 V IEC60320 C20) and four power distribution
boxes (200 V IEC60320 C19×3type) for 200 V dual power feed configuration.
When the power distribution box is used, it is necessary to secure the breaker characteristic of distribution
panel. See "2.6 Cutoff Characteristics of Distribution Panel (At the time of connecting power distribution

FIGURE 2.20 200 V Dual Power Feed Configuration with Power Distribution Box Connection

Number
(1)

2.3.3 Power Cable Connections (PCI_Box)

This section shows the figure of input power of PCI_Box.
Remarks
While configuring redundant power feed and dual power feed in this device, configure the same power feed
to PCI_Box.
100 V Configuration (single power feed, no redundant power feed)
It is necessary to arrange PSU and power cable (100 V NEMA 5-15P) for 100 V configuration (Single power
feed, no redundant power feed).

FIGURE 2.21 100 V Configuration (Single power feed, no Redundant power feed)

(1)
Power distribution box (200V C 19  3 type)
Number
Customer distribution panel AC 100V AC#0 system
Download from Www.Somanuals.com. All Manuals Search And Download.
Description
Description
27
box)."
C122-H007-01EN