Figure A.1 Example Of Rack Mounting - Fujitsu PRIMEQUEST 2000 Series Hardware Installation Manual

Appendix A Racks
A.2 Rack Mounting Requirements
Rack mounting requirements
The following table lists the requirements for mounting in one rack.
Model
PRIMEQUEST 2000 series
PCI_Box
(*1) For the models 2742/2737/2724/2642/2624/2616 and PCR M1 742S/724S/642S/624S/616S/742A/724A,
the bottom of the mounted device must not be below 2U.
(*2) For the models 2742/2737/2724/2642/2624/2616 and PCR M1 742S/724S/642S/624S/616S/742A/724A,
the top of the mounted device is 22U (1,020 mm).
For details, contact the distributor where you purchased your product, or your sales representative.
Number of
mountable units
3
No mounting requirements

FIGURE A.1 Example of rack mounting

Number
(1) Example 1 of rack mounting for model 2642
(2) Example 2 of rack mounting for model 2642
(3) 1,022 mm
(4) 1,060 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
Mounting area
The bottom of the mounted device must not be
below 1U. (*1)
The top of the mounted device must not be above
1,066 mm from floor. (*2).
Description
36 C122-H007-01EN