System Board; Removing The System Board - Dell OptiPlex Micro 7010 Owner's Manual

System board

Removing the system board

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the hard drive, if applicable.
4. Remove the coin-cell
5. Remove the M.2 2230 solid-state drive
6. Remove the wireless card.
7. Remove the speaker.
8. Remove the fan.
9. Remove the memory.
10. Remove the heat sink.
11. Remove the processor.
12. Remove the optional I/O module
About this task
The following images indicate the system board connectors.
1. M.2 WLAN connector
2. M.2 SSD PCIe connector (2230/2280)
Before working inside your
battery.
or M.2 2280 solid-state
(VGA/HDMI/DP/Serial)or the
computer.
drive, whichever applicable.
optional Type-C
Removing and installing Field Replaceable Units (FRUs)
module, whichever applicable.
67