Pair With Another Bluetooth Device - Philips TAH6509 User Manual

3
Turn on the Bluetooth function of
your Bluetooth device.
4
Pair the headphones with your
Bluetooth device, refer to the user
manual of your Bluetooth device.
Note
 After powering on, if the headphones can not
�nd any previously connected Bluetooth device,
please put them into pairing mode (press the
power button for 5 seconds).
The following example shows you how to
pair the headphones with your Bluetooth
device.
1
Turn on the Bluetooth function of
your Bluetooth device, select
Philips TAH6509.
2
Enter the headphones' password
"0000" (4 zeros) if prompted. For
those devices featuring Bluetooth 3.0
or higher, there is no need to enter a
password.
Philips TAH6509
Pair the headphones with
another Bluetooth device
If you want to pair another Bluetooth
device with the headphones, just put them
into pairing mode (press the power button
for 5 seconds), then discover the second
device as per normal pairing.
Note
 The headphones store 5 devices in the memory.
If you try to pair more than 5 devices, the earliest
paired device is replaced by the new one.
05"
7 EN