Table of Contents
Advertisement
Canon
F.
High Capacity Stacker
The High Capacity Stacker is a mandatory accessory and at least one stacker
must be purchased to use the VP6000 TITAN Series device.
Note: when printing light weight media Canon USA recommends a stack height
not to exceed 6 inches (150 mm) (approximately 2,000 sheets) to ensure a
more consistent stack quality.
1. High Capacity Stacker 2.1 with Top Cover
•
Provides large stacking for paper sizes up to 13.8" x 19.7" (350mm x
500mm).
•
Capacity of up to 6,000 sheets of plain paper 20 lb bond (80 g/m
(Two stacks of up to 3,000 sheets each).
•
Up to three (3) High Capacity Stackers can be connected.
2. High Capacity Stacker 2.1 with Set Finisher
•
Provides large stacking for paper sizes up to 13.8" x 19.7" (350mm x
500mm).
•
Capacity of up to 6,000 sheets of plain paper 20 lb bond (80 g/m
(Two stacks of up to 3,000 sheets each).
•
The Set Finisher has a stacking capacity of up to 4,000 Sheets of plain
paper 20 lb bond (80 g/m
• The upper output (error) tray supports sheet sizes up to
• The three (3) bin tray has a capacity of up to 3,500 sheets LTR
•
Can corner or double staple up to 100 sheets of plain paper 20 lb bond
(80 g/m
•
One (1) High Capacity Stacker with Set Finisher can be connected with
up to two (2) High Capacity Stackers with top cover.
G.
DFS30-N Tape Binder
•
In-line Tape Binder for the varioPRINT 6000 TITAN Series.
•
Maximum Binding Capacity: up to 120 sheets (up to 118 inner sheets
of paper (80 g/m²) and 2 cover sheets (up to 216 g/m
•
Tape strips are available in four colors: Black, Dark Blue, Red, and White.
varioPRINT 6000 TITAN Series Service Guide
Revision 1
12.6" x 19 .2" with a capacity of up to 500 sheets.
paper 20 lb bond (80 g/m
2
).
varioPRINT 6000 TITAN Series Service Guide
2
).
2
).
2
2
2
)).
April 2021
Page 20
)
)
Advertisement
Table of Contents
