Beko 17WLB450S Operating Instructions Manual page 14

TV set up
The TV set up is accessed through the menu
system.
Once you have stored your set up, this is the
set up the TV will default to when you switch
on.
To enter the MAIN menu press the
Menu button.
Once in the MAIN menu use the
Program up and Program down
buttons to select items in the menu and
the OK to access sub menus or use the
OK
coloured fastext buttons for quick
access.
Blue button
Red button
Green button - PICTURE
Purple button - FEATURE
MAIN MENU
SOUND
PICTURE
PROGRAM TABLE
SETUP
FEATURE
Please note
If you do not press any buttons for 15 seconds
the TV will exit the menu system.
Sound menu (red button)
SOUND
VOLUME
BALANCE
MONO
SOUND TYPE
SPATIAL
SOUND MODE
ON
AVL
EQUALISER
HEADPHONE
STORE
Select the required item in the menu
using the Program up/down buttons
and make the changes by pressing
the Volume up/down buttons. Use the
OK button to enter headphone from
the main menu.
- TUNING
- SOUND
-15-
Volume
Set a default volume level using the Volume
up and down buttons.
T o save your settings, select STORE
and press the OK button, STORED
will be displayed. Press the Menu
OK
button to go back to the previous
menu.
Balance
Set the sound balance level using
the Volume up and down buttons.
T o save your settings, select STORE
and press the OK button, STORED
OK
will be displayed. Press the Menu
button to go back to the previous
menu.
Sound type
This item shows STEREO when receiving
stereo transmission and MONO for mono
transmissions.
If the channel you are watching is in Nicam
stereo the On Screen Display will show
NICAM STEREO for a while.
Please Note
If, while watching a nicam stereo channel,
the signal strength drops and the system
cannot receive nicam stereo the OSD will
show MONO. If the signal strength increases
again and nicam stereo can be received
again, the OSD will show NICAM STEREO.
T o save your settings, select STORE
and press the OK button. STORED
OK
will be displayed. Press the Menu
menu.button to go back to the
previous MENU.