Beko 17WLB450S Operating Instructions Manual page 24

INTRODUCTION
Because your 17"16:9 LCD-TV equipment is provided with VGA inputs, it may be used
as a PC monitor as well. (Pug&Play).
A time delay is present during changing from TV to PC mode this is normal and not a
fault.
3
4 5
HOLD
6
SUB
8
7
9
UPDATE
AV 0
-/--
MIX
TV/PC
OK
Brightness Contras
‹
ETC
Info Misc
To browse in the menus, you may use the "PR
buttons to select the type of adjustment you wish to make. Once you make your selection,
you may set the desired adjustment value using the "PR
To store setting browse to save using "PR
"select yes using "PR
"VOL "/"VOL
BRIGHTNESS
After entering the Brightness Menu using the "VOL "/"VOL
the brightness value of the monitor to the desired level by using the "PR
buttons.
CONTRAST
After entering the Contrast Menu using the "VOL "/"VOL
contrast value of the monitor to the desired level by using the "PR
POSITION
After entering the Position Menu using the "VOL "/"VOL
geometrical adjustment value of the monitor to the desired level by using the
"PR "/"PR " buttons.
H-POSITION : Horizontal position adjustment
V-POSITION : Vertical position adjustment
IMAGE
After entering the Image Menu using the "VOL "/"VOL
phase adjustment value of the monitor to the desired level by using the
"PR "/"PR " buttons
PHASE : ADC sampling phase adjustment
CLOCK : ADC clock count Per line
Entering the PC Mode
1. Plug one end of a VGA Lead to the computer monitor
output and the other end to the VGA input on the back of
the TV.
2. To enter the LCD-TV into the PC monitor mode, press the
"MIX(TV-PC)" button on your remote control. Each time the
"MIX(TV/PC)" button is presed, operation changes from the
PC mode, to TV mode. In addition, you may return to the
TV mode by selecting the "TV SELECTION" option from the
monitor menu, or press and hold the AV button on the TV.
Note 1:
When the system is in the monitor (PC) mode, the
sound from the TV channel selected may be heard from the
speakers. When you enter this mode, the sound control
buttons on the remote control. (
become functional.
Note 2: When the system is in the monitor mode, the
STANDBY button is operational. Upon exit from STANDBY,
the system starts up in the TV mode again.
Position Image Auto config
TV Select Gamma Save
"/"PR ". Select using
"/"PR ". To exit press menu on TV.
-25-
"VOL "/"VOL
PC Mode Menu Structure
After changing to the PC mode,
you may access the monitor
menus by pressing the "MENU"
button on the front panel of the
system
"/"PR " buttons and Vol+ or Vol-
"/"PR " buttons.
" buttons, you may set
" buttons, you may set the
"/"PR " buttons.
" buttons, you may set the
" buttons, you may set the
" MUTE)
"/"PR "