Connecting External Equipment; Connecting A Video Recorder - Beko 17WLB450S Operating Instructions Manual

Connecting external
equipment
You can connect a wide range of audio and video equipment
to your TV .

Connecting a video recorder

Via SCART
Make sure the TV and video recorder are both
switched off.
Plug one end of the SCART lead (not supplied)
into the back of the video recorder and the
other end into one of the SCART sockets on the
back of the TV .
Switch on the video recorder and the TV.
Press the AV button on the remote
AV
control to select AV1 or AV2 to
correspond with the SCART socket
you are using on the back of the TV.
Please note:
You can connect RGB external equipment
via Scart. It is necessary to you use a full Scart
cable for this purpose.
Select the video output of the external device
by referring to its operation instructions.
Via Phono lead (optional)
Make sure the TV and video recorder are
both switched off.
Plug one end of the Phono lead into the
video and audio out sockets on the back of
the video recorder and plug the other end
into the video and audio in sockets of the
TV .
If the sound is mono, use the Audio Input L.
and in the SOUND menu select the MONO
feature.
SOUND
VOLUME
BALANCE
SOUND TYPE
SOUND MODE
AVL
EQUALISER
HEADPHONE
STORE
-21-
MONO
SPATIAL
ON