Connecting External Equipment - Beko 20LB330 Operating Instructions Manual

Connecting external
equipment
You can connect a wide range of audio and
video equipment to your TV.
Connecting a video recorder
Via SCART
Make sure the TV and video recorder are both
switched off.
Plug one end of the SCART lead (not supplied)
into the back of the video recorder and the other
end into one of the SCART sockets on the back
of the TV.
Switch on the video recorder and the TV.
( )
Press the
control to select AV1 or AV2 to
correspond with the SCART socket
you are using on the back of the TV.
Please note: You can connect RGB external
equipment via Scart. It is necessary to you use
a full Scart cable for this purpose.
Select the video output of the external device
by using its menu, and set to RGB.
button on the remote
Via Phono lead (not supplied)
Make sure the TV and video recorder are both
switched off.
Plug one end of the PHONO lead into the video
and audio out sockets on the back of the video
recorder and plug the other end into the video
and audio in sockets of the TV.
If the sound is mono, use the Audio Input L. and
in the SOUND menu select the MONO feature.
-21-