Beko 20LB330 Operating Instructions Manual page 21

Via aerial socket
Make sure the TV and video recorder are both
switched off.
Unplug the aerial lead form the TV and plug it
into the aerial socket on the video
recorder.
Plug a coaxial plug into the RF out socket on the
rear of the video recorder and plug the other
end into the aerial socket on the TV.
Switch on the video recorder and the TV. If your
video recorder has a test signal, switch it on.
(Refer to the video recorder user guide). Or play
a prerecorded tape.
See 'Tuning the TV' and carry out the tuning
procedure for the video recorder test signal.
Select a programme number 0.
Via Phono lead and S-Video
socket
You can also connect it through the
S-Video socket of the TV.
Plug the S-Video plug into the S-Video socket
and the audio leads into the audio sockets.
-22-