Manual Tuning - Beko 20LB330 Operating Instructions Manual

Press the right movement button
highlight the AUTO PROGRAM option,
( )
press the
selection the "COUNTRY SELECTION"
menu will appear on screen. Using the
direction buttons on your remote control,
highlight and select U.K. option and
( )
press the button. The AUTO PROGRAM
setup menu will appear on screen and after
( )
pressing the button once more, the program
channels will be tuned and stored in sequence. At
this point an AUTO PROGRAM function bar will
be displayed.
After the application is complete, the
PROGRAMME TABLE will then appear on
screen. To stop the process at any given
time, press the
numbers that have been stored are reflected
in the PROGRAMME TABLE, giving you
the ability to assign any program number
to the channel of your choice.
Manual tuning and storing of the
television programs: If you already
know the Channel number:
(See page 29)
( )
Press the
control and using the
the SETUP MENU. Press
u (
sing the
manual tuning bar in blue
( )
button, or the right movement
button you will have access to this menu.
( )
button. Following this
( )
button. The program
button on your remote
( ) button
select
( ) button then
) button highlight the
press the
Select "MANUAL TUNING" highlight the
and
CHANNEL bar, selecting the programs by pressing
( )
for the "S" band in locating cable channels
and the "C" band for those channels received by
an aerial. Using the number buttons of your remote
control, you can apply the channel numbers
accordingly. If the program found on screen is
acceptable in quality, then in order to store it use
the upward movement button
the PROGRAMME NO.
Enter the number that you wish to assign
to the channel by using the number
buttons on your remote control. By using
the right-left movement buttons
you also have the option to choose the
number.
With the downward movement button
(
then press the
the "STORED" displayed.
The program will be stored to the number
of your choice and you can also store
( )
the other channels in the same way. To
exit the MANUAL TUNING menu, press
the
-12-
(
)
highlight the STORE option and
( )
button you will see
( )
button.
)
to highlight
( )/( )