Using The Tv - Beko 20LB330 Operating Instructions Manual

Using the TV

STAND-BY
Switch on the television By pressing the
main ON/OFF button
by light will glow. To switch the television
to standby press the red
located on the upper right hand side of
your remote control.The sound and
picture will go off and the power
indicator will brighten. To switch back
on, either press the same button, any of
the number buttons or one of the
buttons.
Caution!
If you are not going to use your television
for a long period of time, make sure to
switch it off from the main power button.
Programme selection
( )
Press the
control, or by selecting a numeric button
in order to get the desired channel on
your television. In order to select a
program whose number is greater than
9, you can use the numeric buttons,
pressing in the desired numbers as
required. For example, to select program
12, press the numeric buttons 1 and 2
one after another.
( ).
The stand-
( )
( )
( )
/ buttons on your remote
Volume
Press the Volume+ or Volume- button on
the TV or the
remote control. A sound level bar will
appear on the screen.
button
MUTE
To mute the sound, press the
Press the same button again, the sound
( )
/
will return. During mute, press the
button the volume will decrease and if
you press the
increase. The mute function will be
cancelled.
Return to Selected Button Program
(SWAP)
To return to the previous program press
the
-10-
( ) ( )
or
( )
button the volume will
( )
button.
button on the
( )
button.
( )