Configure Pcs On Your Lan; Tcp/Ip Network Setting - D-Link DSA-3100 Owner's Manual

Configure PCs on your LAN

After installing the DSA-3100, each computer's TCP/IP network setting and Internet
access configuration may need to be re-configured:

TCP/IP network setting

I
f your PC uses the default Windows XP/2000/Me/98SE setting, no
changes need to be made. Just start/restart your PC.
If you are running Mac OS 9 or OS X, set your network settings to
DHCP and select Apply.
DSA-3100 will act as a DHCP Server, automatically providing a
suitable IP address (and related information) to each computer
when the computer reboots or when the network settings refresh.
For all non-Server versions of Windows, the default TCP/IP setting
is to act as a DHCP client. In Windows, this is called Obtain an IP
address automatically.
If you are using a fixed IP address on your LAN, or if you want to check
your TCP/IP setting, refer to the Networking Basics section in
this manual.
12