D-Link DSA-3100 Owner's Manual page 22

Using the Configuration Utility (continued)
Home > Authentication (continued)
Enable
DHCP Selecting this option activates the device's built-in DHCP server.
Server: Configure the DHCP server with the following properties:
DHCP Pool
Start IP
Address:
DHCP Pool
End IP
Address:
Lease Time:
Domain
Name:
WINS IP
Address:
Preferred
DNS Server:
Alternate
DNS
Server:
Enable
DHCP
Select this mode to specify another DHCP server's IP address.
Relay:
Enter the starting IP address, from which group of addresses
the DHCP server will assign IP addresses to the DHCP-
enabled devices (clients) on the network.
Enter the last IP address in the sequence of addresses from
which the DHCP server will assign addresses.
Select the length of time during which the DHCP assigned
address will be in effect.
Enter the domain name.
Enter the WINS server's IP address.
Enter the IP address of the preferred DNS server.
Enter the IP address of the alternate DNS server.
22