Table of Contents
Advertisement
MAINTENANCE
Cleaning
When the unit becomes dirty
Clean it with a soft cloth.
When the unit is excessively dirty, use a
soft cloth dampened in water.
(External surfaces only)
Clean the headphone plug and the RCA
cord plug.
This will prevent noise.
SPECIFICATIONS
As a part of our policy of continuous improvement, SHARP reserves the right to
make design and specification changes for product improvement without prior notice.
The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
General
Power source:
DC 3.6V (rechargeable lithium-ion battery x 1)
DC 5V (AC adaptor)
AC 120V, 60 Hz
DC 3V:
DC 4.5V:
Power consumption:
0.15 A (AC adaptor)
4 W
Output power:
RMS; 20 mW (10 mW + 10 mW)
(0.2% T.H.D.)
Charging time:
Approx. 2.5 hours
(When using the AC adaptor included with the unit)
Battery life:
When using the recharge-
When using two, commercially
able battery (fully
available, high capacity, "AA"
charged) included with
size, alkaline batteries (in the op-
the unit
tionally available battery case)
Continuous recording:
Approx. 3.5 hours
Continuous play:
Approx. 5 hours
Notes:
Do not use chemicals for cleaning
(gasoline, paint thinner, etc.)
It may affect the quality or color.
Do not apply oil to the inside of the unit.
It may cause malfunctions.
Optionally available battery case, AD-M70BC
(commercially available, "AA" size, alkaline
battery x 2)
Optionally available car adaptor, AD-CA20X
(for cars with a 12-24V DC negative ground
electrical system)
When using two, commercially
available, high capacity, "AA"
size batteries with the recharge-
able battery (fully charged)
Continuous recording:
Approx. 4 hours
Continuous play:
Approx. 8 hours
40
Continuous recording:
Approx. 7.5 hours
Continuous play:
Approx. 13 hours
MD-MS702
Hide quick links:
Advertisement
Table of Contents
