12
USB cable scanning
Using the Scan key over a USB cable connection
Note
If you use the Scan key on a network, see Network Scanning on page 178.
You can use the
processing, graphics or E-mail applications, to a folder on your computer, to a memory card or USB Flash
memory drive.
Before you can use the
software suite and connect the machine to your computer. If you installed the MFL-Pro Suite from the
included CD-ROM, then the correct drivers and the ControlCenter software are installed. Scanning using the
(Scan) key uses the configuration of the Device Button tab of the ControlCenter software. (For
®
Windows
, see SCAN on page 57. For Macintosh, see SCAN on page 143.) For details about how to
configure the scan settings and to launch the application of your choice using the
Using ControlCenter3 on page 54 (Windows
Scan to E-mail
You can scan either a black and white or color document into your E-mail application as a file attachment.
a
Load your document.
b
Press
(Scan).
c
Press a or b to choose Scan to E-mail.
Press OK.
d
Press Black Start or Color Start.
The machine starts scanning the document, creates a file attachment, and launches your E-mail
application, displaying the new message waiting to be addressed.
For Touchscreen models
a
Load your document.
b
Press
(Scan).
c
Press Scan to E-mail.
d
Press Black Start or Color Start.
The machine starts scanning the document, creates a file attachment, and launches your E-mail
application, displaying the new message waiting to be addressed.
(Scan) key on the control panel to scan documents directly into your word
(Scan) key on the control panel, you have to install the Brother MFL-Pro
®
) or ControlCenter2 on pages 141 (Macintosh).
12
12
(Scan) key, see
12
12
12
166