Configuring Network Scanning For Windows - Brother DCP-J125 User Manual

Network Scanning (For models with built-in network support)

Configuring Network Scanning for Windows

If you are using a different machine than the one that was originally registered to your PC during the
installation of MFL-Pro Suite software (see the Quick Setup Guide), follow the steps below.
®
a
(Windows 2000)
Click the Start button, Settings, Control Panel, then Scanners and Cameras.
®
(Windows XP)
Click the Start button, Control Panel, Printers and Other Hardware, then Scanners and Cameras
(or Control Panel, Scanners and Cameras).
®
(Windows Vista )
Click the button, Control Panel, Hardware and Sound, then Scanner and Cameras.
®
(Windows 7)
Click the button, All Programs, Brother, MFC-XXXX, Scanner Settings, then
Scanners and Cameras.
b
Do one of the following:
®
 (Windows 2000) Select your Brother machine from the list and click Properties.
®
 (Windows XP) Right-click the Scanner Device icon and choose Properties.
The Network Scanner Properties dialog box appears.
®
 (Windows Vista
®
and Windows 7) Click the Properties button.
®
13
13
188