Brother MFC-9840CDW Network User's Manual page 25
Multi-protocol on-board ethernet multi-function print server and wireless (ieee 802.11b/g) ethernet multi-function print server
Hide thumbs
Also See for MFC-9840CDW:
- User manual (263 pages) ,
- Quick setup manual (53 pages) ,
- Service manual (491 pages)
Table of Contents
Advertisement
c
Double-click the unconfigured device.
®
Windows
Note
• If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the
device will appear as Unconfigured in the BRAdmin Light utility screen.
• You can find the node name and Ethernet address by printing the Network Configuration List. See Printing
the Network Configuration List on page 105 for information on how to print the Network Configuration List
on your print server.
d
Choose Static from Boot Method. Enter the IP address, Subnet Mask and Gateway (if needed) of
your print server.
®
Windows
e
Click OK.
f
With the correctly programmed IP address, you will see the Brother print server in the device list.
Configuring your machine for a network with an Ethernet cable connection
®
Macintosh
®
Macintosh
2
15
Advertisement
Table of Contents
Troubleshooting
