Set Date And Time - Canon imageCLASS D1120 User Manual

3 Make Fax Settings (D1180/D1170/D1150 Only)

Set Date and Time

Before using the machine, you MUST set the current date and time. The current date and time settings are used as
standard timer settings for functions that require them.
Entering Information
●
Use – [numeric keys] to enter numbers.
‒
Press or to move the cursor position.
‒
Press [OK] to confirm the entry.
‒
Press [Clear] to delete entire entry.
‒
The display returns to the standby mode:
●
The machine may enter the standby mode (Auto Clear function) while you are
setting it up. Make the setting again from the main menu.
The display turned OFF:
●
The machine may enter the Sleep mode while you are performing setup. Press
[Energy Saver] to turn the display back ON and continue the setup.
1
Press [Menu].
2
Press or to select <7. TIMER
SETTINGS>, then press [OK].
M E N U
7 . T I M E R
3
Press or to select <1. DATE&TIME
SETTING>, then press [OK].
T I M E R S E T T I N G S
1 . D A T E & T I M E
12
S E T T I N G S
S E T T I N G
4
Use – [numeric keys] to enter the date
(month/day/year) and time (in 24-hour/military
time format), then press [OK].
Ex.
D A T E & T I M E
1 2 / 3 1 / ' 0 8
If you accidentally enter an incorrect number, press
to move the cursor to the number that needs
correction and overwrite it.
5
Press [Stop/Reset] to return to the standby
mode.
–
You can select one of the following three date formats in
<3. DATE TYPE SELECT>.
<MM/DD/YYYY>
<DD/MM YYYY>
<YYYY MM/DD>
–
By default, <6. DAYLIGHT SV. TIME> in the <7. TIMER
SETTINGS> menu is set to <OFF>.
–
If you want to set <6. DAYLIGHT SV. TIME> in the <7.
TIMER SETTINGS> menu to <ON>, see "Introduction of
the Machine, " in the e-Manual.
S E T T I N G
1 5 : 5 0
or