If You Need To Use Pulse Dialing - Canon imageCLASS D1120 User Manual

If You Need to Use Pulse Dialing

By default, the telephone line type on the machine is set to tone dialing. If you use tone dialing, skip the
following procedure.
If you use pulse dialing, perform the procedure below and change the telephone line type setting on the
machine to pulse dialing.
If you do not know the type of telephone line you use, contact your local telephone company.
1
Press [Menu].
2
Press or to select <4. TX/RX SETTINGS>, then press [OK].
3
Press or to select <3. FAX SETTINGS>, then press [OK].
4
Press or to select <2. USER SETTINGS>, then press [OK].
5
Press or to select <2. TEL LINE TYPE>, then press [OK].
6
Press or to select telephone line type, then press [OK].
− <TOUCH TONE>: Tone dialing (Default)
− <ROTARY PULSE>: Pulse dialing
7
Press [Stop/Reset] to return to the Standby mode.
3 Make Fax Settings (D1180/D1170/D1150 Only)
15