Canon VB-C500D Operation Manual page 27

Example: To specify August 23, 2008 1:23:04 pm, enter "2008/08/23" and "13:23:04."
[Synchronize with NTP server]
The camera will synchronize with that time of the NTP server. Enter the IP address of the
NTP server.
[Synchronize with NTP broadcast]
The camera will synchronize with the NTP broadcast time.
[Synchronize with computer time]
The camera will synchronize with the date and time of the computer currently accessing
the camera. The time zone will also be selected automatically.
(3) [Time Zone]
Select from the list an applicable time difference from the Greenwich Mean Time.
Tip
If [Synchronize with computer time] is selected, clicking the [Apply] button to apply the
setting will cause the setting shown under [Setting Method] to change to [Set manually].
If [Synchronize with NTP Server] is selected, the date and time will not be changed when
the IP address of the NTP server is wrong or otherwise the NTP server cannot be
connected.
The camera's NTP does not support IPv6.
Setting the Date and Time (Date and Time)
1
1
1-13