Canon VB-C500D Operation Manual page 48

Setting the Image Buffer, Motion Detection, Audio Playback and Interval Timer (Event)
(7) [Audio Playback at ON Event]
Select the audio playback operation to be performed upon an ON event. If [Enable] is
selected, the sound specified under [Sound Clip] will be played when the mode changes to
[Detected] (ON event).
(8) [Audio Playback at OFF Event]
Select the audio playback operation to be performed upon an OFF event. If [Enable] is
selected, the sound specified under [Sound Clip] will be played when the mode changes to
[Detected] (OFF event).
(9) [Sound Clip]
Select the audio to be played. For registration of sound clip, see "Sound Clip Upload"
( P. 1-36).
[Volume
(10) ]
Select the volume of sound clip using an integer of 1 to 100. The greater the value, the larger
the volume becomes.
Note
The motion detection function cannot be interlocked with external device output. However,
interlocking is possible if the optional recording software VK-64/VK-16 is used.
For precautions on motion detection, see "Notes on Use of Motion Detection, Streaming
and Bundled Recording Software VK-Lite" (
External Device Input
(1) [External Device Input Event]
Select whether to [Enable] or [Disable] external device input events.
1-34
Start Guide).