Notes About The Configuration File - D-Link DES-3624 Series User Manual

Stackable NWay Ethernet Switch User's Guide

Notes about the Configuration File:

This configuration file can only contain 4 settings: and
Code_type, Ip_addr, Subnet_mask
.
Default_gateway
Each command can only appear once in the configuration file.
If both the Firmware Update and Use Config File options are enabled, the Firmware Update command will
take precedence and only the firmware file will be uploaded to the switch.
The Config image file, which contains all configuration settings and was created by the switch is prefixed
with the version number of the runtime software to help with file management.
# Sample Config File
Code_type=PROM
Image_file="e:\3624\3624prom.tfp"
# specify IP address
Ip_addr = 10.12.19.102
# specify subnet mask
Subnet_mask = 255.128.0.0
# specify default gateway
Default_gateway = 10.254.254.253
Sample Configuration File 171