Configure Ip Address - D-Link DES-3624 Series User Manual

Stackable NWay Ethernet Switch User's Guide
Figure 6-8. System Configuration menu
You will need to change some settings to allow you to be able to manage the Switch from an SNMP-based
Network Management System such as SNMP v1 or to be able to access the Switch using the Telnet protocol.
See the next chapter for Web-based network management information.

Configure IP Address

The Switch needs to have a TCP/IP address assigned to it so that an in-band network management system or
Telnet client can find it on the network. The IP Address Configuration screen allows you to change the
settings for the two different interfaces used on the Switch: the Ethernet interface used for in-band
communication, and the SLIP interface used over the console port for out-of-band communication.
Choose Configure IP Address to access the first item on the System Configuration menu. The following
screen appears:
50 Using the Console Interface